main feature

1. Effortless operation: The ball is supported by upper and lower bearings, which reduces friction and eliminates the huge sealing load caused by the inlet pressure pushing the ball and the seal seat.

Excessive torque.

2. Reliable sealing performance: The PTFE single material sealing ring is embedded in the stainless steel valve seat. A spring is provided at the end of the metal valve seat to ensure sufficient pre-tightening force of the sealing ring. The valve

When the sealing surface wears during use, the valve continues to ensure good sealing performance under the action of the spring.

3. Fireproof structure: In order to prevent the polytetrafluoroethylene sealing ring from burning due to sudden heat or fire, resulting in larger leakage and fueling the fire, the ball and valve are

A fireproof sealing ring is set between the seats. When the sealing ring burns out, the valve seat sealing ring is quickly pushed onto the ball under the action of spring force, forming a metal-to-metal seal.

Sealing, achieving a certain degree of sealing effect.?The fire resistance test meets the requirements of APl6FA and APl607 standards.

4. Automatic pressure relief function: When the stagnant medium pressure in the middle cavity of the valve rises abnormally and exceeds the pretightening force of the spring, the valve seat retreats away from the ball to achieve automatic pressure relief.

As a result, the valve seat automatically resets after pressure relief.

5. Drainage pipeline: Drainage holes are provided on the upper and lower sides of the valve body to check whether the valve seat is leaking. During operation, when the valve is fully open or fully closed, remove the middle chamber pressure

Force, the packing can be replaced directly; the residue in the middle cavity can be discharged, reducing the contamination of the valve by the medium.

product specifications

Design specifications:?GB/T12237, API6D, ANSI B16.34

Structure length:?GB/T15188, API6D, ANSI B16.10

Connection standards:?JB/T79, ANSI B16.5, B16.47

Pressure test:?GB/T9092, API6D, API598

Product Range

Nominal diameter:?DN50-DN800

Pressure range:?1.6-16MPa

Applicable temperature:?≤120℃

Operation mode: worm gear, pneumatic, electric

Applicable media: water, gas, oil, natural gas, and acid-base corrosive media.

Chief Features：

Compared with floating ball valve, when working, all the forces generated by the fluid pressure in front of the valve on the ball are transmitted to the bearing, which will not make the ball move towards the valve seat, so the valve seat will not bear excessive pressure.And the torque of trunnion ball valve is small, the valve seat deformation is small, the sealing performance is stable, and the service life is long, which is suitable for high-pressure and large-diameter occasions. Advanced spring pre-seat assembly with self-tightening feature realizes upstream sealing. Each valve has two seats, which can be sealed in each direction. Therefore, there is no flow restriction for installation, and it is bi-directional. The valve is generally installed horizontally.

A variety of soft seal and hard seal seat materials to meet more process conditions
According to your requirement the valve can meets NACE standard, fugitive emission function and fire test certification of API Spec 607
The seat can be designed with double or single piston and has lower operating torque
All valves have self cavity pressure relief function to ensure the safety of the pressure in the middle chamber

Chief Features

Compared with floating ball valve, when working, all the forces generated by the fluid pressure in front of the valve on the ball are transmitted to the bearing, which will not make the ball move towards the valve seat, so the valve seat will not bear excessive pressure.And the torque of trunnion ball valve is small, the valve seat deformation is small, the sealing performance is stable, and the service life is long, which is suitable for high-pressure and large-diameter occasions. Advanced spring pre-seat assembly with self-tightening feature realizes upstream sealing. Each valve has two seats, which can be sealed in each direction. Therefore, there is no flow restriction for installation, and it is bi-directional. The valve is generally installed horizontally.

A variety of soft seal and hard seal seat materials to meet more process conditions

According to your requirement the valve can meets NACE standard, fugitive emission function and fire test certification of API Spec 607

The seat can be designed with double or single piston and has lower operating torque

All valves have self cavity pressure relief function to ensure the safety of the pressure in the middle chamber

Chief Features

The structure design of elastic sealing ring has been adopted for floating ball valves. This seat design features is a bigger sealing pressure ratio between the ring surface and the ball when medium pressure gets lower where the contacting area is smaller, thus the reliable seal is ensured.when the medium pressure gets higher, the contacting area between seat ring and ball becomes bigger as the sealing ring transforms elastically to under take the bigger force pushed by the medium without any damage.

A variety of soft seal and hard seal seat materials to meet more process conditions

The optimized limiting device further improves the accuracy of the valve passage and the flow CV control

ISO platform can be selected to facilitate the operation of the actuator

The valve meets NACE standard, fugitive emission function and fire test certification of API Spec 607

The valve seat is designed with two-way seal and low operating torque. All valves have built-in cavity relief devices to relieve pressure from the upstream seat and apply positive preload to ensure low pressure seal

main feature

The fixed ball valve?has small torque, small valve seat deformation, stable sealing performance and long service life. It is suitable for high pressure and large diameter occasions.

product specifications

Product Range

Main material: carbon steel, stainless steel, alloy steel

Nominal diameter:?DN15-DN800

Pressure range:?1.0-100Mpa

Applicable temperature:?-29-450?℃

Operation mode: manual, pneumatic?, electric, hydraulic

Applicable media: water, steam, petroleum, coal, fiber, thick and corrosive media

main feature

1.?The fluid resistance is small, and the full-diameter ball valve has basically no flow resistance.

2.?Simple structure, small size and light weight.

3.?Tight and reliable.?It has two sealing surfaces, and the sealing surface materials of ball valves currently use various plastics, which have good sealing properties and can achieve complete sealing.?in real

It has also been widely used in air systems.

4. Easy to operate, quick to open and close, just rotate?90°?from fully open to fully closed?, convenient for long-distance control.

5.?It is easy to maintain. The ball valve has a simple structure and the sealing rings are generally movable, making it easy to disassemble and replace.

6.?When fully open or fully closed, the sealing surfaces of the ball and valve seat are isolated from the medium. When the medium passes, it will not cause erosion of the valve sealing surface.

7.?It has a wide range of applications, with diameters ranging from a few millimeters to several meters, and can be applied from high vacuum to high pressure.

8.?Since the ball valve has wiping properties during the opening and closing process, it can be used in media with suspended solid particles.

product specifications

Design specification:?API6D ANSI B16.34

Structure length:?API6D ANSI B16.10

Connection standard:?ANSI B16.5

Pressure test:?API6D API598

Product Range

Main material: carbon steel, stainless steel, etc.

Nominal diameter:?DN15-DN250

Pressure range:?1.6-6.4Mpa

Applicable temperature:?-196-350℃

Operation mode: manual, pneumatic, electric, hydraulic

Applicable media: water, steam, oil, etc.

main feature

1. The three-way ball valve adopts an integrated structure, a 4-sided valve seat sealing type, fewer flange connections, high reliability, and a lightweight design.

2. The three-way ball core is divided into T shape and L shape, with long service life, large circulation capacity and small resistance.

3. Ball valves are divided into two types: single-acting and double-acting. The characteristic of the single-acting type is that once the power source fails, the ball valve will be in control system requirements.

status.

product specifications

Design specifications:?GB/T 12237, API 6D, API 608, BS 5351??Structural length:?GB/T 12221, ASME B16.10

Connection standard:?GB/T 9113, ASME B16.5???Pressure test:?GB/T 13927, API 598, API 6D

Product Range

Main material: carbon steel, stainless steel

Nominal diameter:?water, oil, gas and other non-corrosive media and acid-base corrosive media

Pressure range:?1.6-6.4MPa

Applicable temperature:?-28-350℃

Operation mode:?manual, electric, pneumatic, hydraulic

Applicable media:?water, oil, gas and other non-corrosive media and acid-base corrosive media

Chief Features

The specially designed V-shaped ball has strong shearing effect and sealing performance on the medium, and can adjust the flow characteristics of the medium in equal proportion

The valve meets NACE standard, fugitive emission function and fire test certification of API Spec 607

API 622 certified live loading of packing makes valve stem sealing safer

The spherical surface can be hardened by hard chromium plating, desalination, supersonic spraying and other sealing surface hardening processes to increase the hardness, wear resistance and corrosion resistance of the sealing surface

The valve seat spring is designed with clip spring, which can provide preload for the valve seat seal and greatly reduce the torque required to drive the valve

Due to the shear force between the V-shaped opening and the valve seat, and the smooth and round flow channel in the valve cavity, the medium is not easy to accumulate in the cavity, so it is more suitable for the system control of medium with fiber and solid particles besides liquid medium

main feature

1. It has an elastic load pressure auxiliary sealing seat to ensure close contact between the valve seat and the ball core.

2. It?has an integral valve body structure and there is no possibility of potential leakage?.

3. It has equal percentage characteristics and a wide range of The control range and particularly stable control process can be widely used in a variety of processes.

4. The valve stem and the ball core are connected by involute splines. When the tooth profile is loaded, there is a radial force on the tooth that can automatically Centering effect, and each tooth is evenly stressed, making it high strength and long life.

product specifications

Design specifications:?GB12237, API 6D

Structure length:?GB12221, ANSI B16.10

Connection standards:??ANSI B16.5, JIS B2212-2214, GB9112

Pressure test:?GB/T13927?,?JB/T9092?,?API598

Product Range

Main material: carbon steel, stainless steel?, etc.

Nominal diameter:?DN25-DN600

Pressure range:?1.6-6.4MPa

Applicable temperature:?-29-425℃

Operation mode: pneumatic

Applicable media: Suitable for the control of gas, liquid, and solid particle media

main feature

1. Its structure adopts the eccentric tightening principle to achieve the purpose of gate tightening, adjustment and closing through the transmission mechanism. The sealing pair is a metal surface ring with a hard surface contact seal, double offset

When the core structure is opened, the valve core is located in the ball chamber, with a large flow cross-section, and the valve will not be washed. When closed, the valve core will not be washed. When it is opened, the spherical surface of the valve core will move along the valve.

The seat is progressive, effectively removing scaling obstacles and achieving reliable sealing.?It is particularly effective for mixed flow transportation of two-phase mixed flow where solids prone to scaling are precipitated.

2. The hemisphere of the valve is made of bimetal, and different alloys are overlayed on the base metal. The valve seat is also overlayed accordingly. After special treatment, the sealing surface is combined into an anti-corrosion, wear-resistant, high-performance sealing surface.

Various types such as strength to meet the needs of different occasions.

3. It is tightly sealed and can transport harmful gases with zero leakage.

4. There is a compensation amount left in the valve core of the sealing pair. When the valve is worn, rotate it a little when closing to ensure reliable sealing and extend the service life.?Additionally, users will

The compression nut is unscrewed and the valve seat can still be used after adjustment or replacement, thus avoiding the disadvantage of scrapping the entire unit if the valve seal fails.

product specifications

Design specification:?GB12237-89

Structure length:?GB12221-89

Connection standard:?GB/T17241.6-1998, GB/T9115

Pressure test:?GB/T13927?,?JB/T9092

Product Range

Main material:?QT450, WCB, ZG20CrMo, ZG1Cr18Ni9Ti

Nominal diameter:?DN40-DN1200

Pressure range:?0.6-4.0MPa

Applicable temperature:?-29-425℃

Operation mode: manual, electric, pneumatic

Applicable media: water, steam, gas, oil, etc

Chief Features：

The structure design of elastic sealing ring has been adopted for floating ball valves. This seat design features is a bigger sealing pressure ratio between the ring surface and the ball when medium pressure gets lower where the contacting area is smaller, thus the reliable seal is ensured.when the medium pressure gets higher, the contacting area between seat ring and ball becomes bigger as the sealing ring transforms elastically to under take the bigger force pushed by the medium without any damage.

A variety of soft seal and hard seal seat materials to meet more process conditions
The optimized limiting device further improves the accuracy of the valve passage and the flow CV control
The valve seat is designed with two-way seal and low operating torque.

main feature

1. Since the valve body is a welded structure, the valve is lightweight and easy to operate.

2. The sealing of the spring-loaded ball ensures?absolute tightness under all application conditions.

3. Absolute rigor

4.?The upper container is replaceable?.

5. Long working life.

product specifications

Design specification:?ANSIB16.34

Structure length:?ANSIB16.10, DIN3202S13

Connection standard:?ANSIB16.25, GB12224

Product Range

Main material:?cast steel, stainless steel

Nominal diameter:?1/4″-4″

Pressure range:?1.6-6.4MPa

Applicable temperature:?-20～250℃

Operation mode:?manual, worm gear, pneumatic, electric

Applicable media:?water, oil, gas and some corrosive liquids (?W.O.G)